2000 Series

These mechanical switch locks control access to electrical equipment. 

Model 2001 has a variable time delay (2 to 60 seconds) to allow the switch to remain energized for a pre-set interval. Temperature range: 15 to 120°F (-9 to 49°C). 

Models 2003 and 2005 are for latching relays on garage door openers, gates, elevators, etc. Built-in Visi-Guard inhibits unauthorized observation of the entry code

Specifications

Construction: All-metal front housing

Electrical rating: UL-rated switch: 10.5 amps at 125-250 VAC/28 VDC.

Wall thickness: surface mounted

Minimum stile required: 31/8.. (79 mm)

Installation: Can be surface-mounted any distance from frame.

Latch/Strike: not included

Control: Includes DF59 Key for combination change

Weight: 4 lbs. (1.8 kg) 

2400 and 2500 Series

 These remote-station shunt lock switches control electric strikes, alarm systems, elevators, garage doors, etc.

Model 2450 features an adjustable time delay (2 to 60 seconds) with a temperature range: 15 to 120°F (-9 to 49°C), and includes a 31/4" x 95/8'' (83 mm x 244 mm) dress plate. Has two normally open and two normally closed solder-type terminals.

2500 Series locks include two LED indicator lights and tamper switch.

Construction: Stainless steel face plates.

Electrical rating: 28 VDC, 2 amp inductive, 6 amp resistive (5 amp-125 VAC-60 Hz) Model 2450:10 amp 125-250VAC/28 VDC

Wall thickness: 3" to 11" (76 to 279 mm)

Installation: In-wall mounted with two draw bolts. 3-gang plate requires: 21/4"W x 51/8"L x 2"D (57 mm x 130 mm x 51 mm) slot. Narrow plate requires: 11/8"W x 61/8"L x 2"D (29 mm x 156 mm x 51 mm) slot. 

Latch/Strike: Not included

Control: Use allen wrench to change combi nation (switch must be removed from wall).

Weight: 3 lbs. (1.4 kg)