|
The sophisticated Moorestown design ties together traditional and modern
features by transitioning smoothly from a round shaft to an octagonal knob or
lever. This uniquely simple and elegant design has a wonderful feel in the
hand. The Forged brass escutcheon plates may be paired with several solid brass
knobs or levers.
|
|
 |
 |
|
Rose
8858-262 Solid Forged Brass.
Octagonal design mirrors the design of knob and lever. Cove molding
makes transition between rose and knob/lever. |
Turnpiece 8868-001 Solid
Forged Brass Turnpiece and Escutcheon with octagonal and ogee
design. Turn piece head mounted perpendicular to face of door evokes
a key. Furnished with #4 Solid Brass oval head wood screws |
|
 |
|
 |
 |
|
Lever 8833 w/8858-175 Solid
Forged Brass Lever and Rose. Lever design has traditional octagonal
cross section with ogee end cap. The 45 degree slash cut transitions
to a contemporary shank. Fully concealed mounting. Levers can be
used with any Von Morris Rose or Escutcheon Plate. |
Knob
8808-275 w/8858-175 Solid
Forged Brass Knob and Rose. Traditional Octagonal design with ogee
on front and rear face of knob transitions to contemporary shank.
Fully concealed mounting. Stocked in all standard finishes. Knobs
can be used with any Von Morris Rose or Escutcheon Plate. |
|
|
|
 |
 |
|
Escutcheon w/Lever 8833
Forged Brass Escutcheons inside and outside. Octagonal design
escutcheon has ogee design around perimeter. 8834 Lever standard;
Also available with 8808-175 or 8808-275 Knob. Plates available with
cuts for all Von Morris Locks as well as custom cuts for other
manufacturers' locks. |
Escutcheon w/Knob 8808-175
Forged Brass Escutcheons inside and outside. Octagonal design
escutcheon has ogee design around perimeter. 8808-175 Knob standard;
Also available with 8833 or 8834 Lever. Plates available with cuts
for all Von Morris Locks as well as custom cuts for other
manufacturers' locks. |
|
|
